do you need a special air compressor for a airbrush kit. if i bought a air brush kit would i be able to connect it to a standard household air compressor please provide a source

Boston, Indianapolis, Sacramento, San Francisco, Tampa, Seattle, Tacoma, Raleigh, San Diego, Gardena, Los Angeles Best Prices On Ductless Mini Split Heat Pumps

Why Pay More To The Other Guys Get Rock Bottom Prices here, No Haggling required
Mini Split Heat Pump Air Conditioner Ductless Wall Mount Type New

Ductless Mini Split Air Conditioners http://www.invincible-electronics.com/

Mini Split Air Conditioner Ductless Heat Pump 13 SEER High-Efficiency
For DC Inverters

We Buy Direct By Eliminating High Middleman Cost, Huge Savings Are Passed Directly Onto You

Best Mini Splits , line Set Included, Full Warranty, Toshiba Compressor, R410A, 5 Years Warranty!
9,000 btu 13 SEER with Heat Pump and Installation Kit 5
12,000 btu 13 SEER with Heat Pump and Installation Kit 5
18,000 btu 13 SEER with Heat Pump and Installation Kit 5
24,000 btu 13 SEER with Heat Pump and Installation Kit 5

FEATURES
Energy-Savings Operation
Quiet Operation
Quick Cooling: Strong emission of cool air reduces the ambient temperature quickly
Intelligent Logic Auto Control: Senses various interior and exterior conditions
and adjust to your preference
Wireless Remote Control
Dry Mode
3 Fan Speeds and Automatic Fan Operation
Air Sweep Control
Louver Control
24-hour ON/OFF Program Timer
Night Setback Mode
Automatic Restart Function after Power Failure
Anti-mold Filter

Central & Portable AC’s also available e-mail or call.
Contact:
Invincible Electronics http://www.invincible-electronics.com/
PH: 813-770-7441

Better Company, Better Prices, Happy Customers- Why Pay More? When you want to Pay Less!

I saw over at Home Depot a 30 gallon air compressor and I’m trying to figure out if having it run at 5.5 scfm at 90 psi continuous output could move a small steam style train. I’m trying to build a train, maybe 2 persons wide, maybe long enough to accompany 20-30 people. OR would it be possible to take a smaller air compressor and run its output through a high capacity turbo charger? I’m trying to create a steam train running off of compressed air rather than an actual steam train system.
What I was really thinking of, was that I could have it look like a real steam engine, but on the inside of the engine would be the air compressor feeding into a small (500hp?) then a large (1000+hp?) supercharger. Instead of just the air compressor, it could be stepped up by the two superchargers.

where can i buy an air compressor from in theuk that has the standard plug to power it rather than a cigarette lighter in a car?
thanx

I want to run an air Compressor out of my truck but i dont want to have to buy the expensive gas powered ones. and the standard 12v air Compressor dont have the output i need for the job, being pneumatic tools and what not…

Hi all, i’m looking for some guidance on troubleshooting my AC problem.
It’s currently blowing hot air. I took it in to a shop and they checked for leaks and didn’t find any. So they filled the coolant back up with a dye and checked again, still nothing.
They hooked up the pressure monitors and said that the low end was 80 and the high end was 150 and their determination was that I needed an new air compressor.

I decided to do the work myself, so I had a mobile AC guy come to drain the coolant. When I told him what was going on he said it didn’t sound like a compressor issue, but was probably the expansion valve.
He hooked up the pressure system again and verified the same numbers as the shop (80lbs on the low side, 150 on the high). He fully thought this was an expansion valve issue.

With that in mind I replaced the expansion valve, and the dryer for good measure. Then he checked for leaks (there are none) and refilled the coolant. But we have the same issue.

He checked around and we found that one of my fans is not coming on.
He is going to check with someone else to confirm his thoughts, but he still believes it is not the compressor, and it may have something to do with the fan not coming on.

Any help is extremely appreciated. I live in California….no AC is no fun at all
Mark,

I do not see improved cooling when driving at excessive speeds, at least nothing really noticeable. Because it’s hot I drove with my windows down, and there was a slight breeze every now and again, so any cool breeze I felt was attributed to that. But feeling the air with my hands I felt no difference.

I will see if I can try the hose trick to confirm that it is in deed no an issue with the fan.

I ran the AC full blast for about 45 minutes yesterday on my way home. Both with circulating air (which blows significantly harder out of the vents) and with flow from outside. There was no change, the A/C is still blowing hot as ever.

With regard to the possible blockage in the evaporator, before the AC coolant was filled again, it was hooked up to a vacuum for about 15-20 minutes to suck out any moisture (so I am told). Would that not have fixed any blockage in there?

I will talk to the tech again to see if we can record the pressures. I don’t have the equipment to do it myself. I
Motorhead,

Maybe I am missing something, but there isn’t any electricity to the expansion valve. The only connections to the expansion valve are the two coolant hoses that go into the front, and the two connections that are on the firewall. Nothing electricity related that I am aware of.

J.R.
The AC guy checked all the fuses when he was trying to find out what was wrong with the fan. He determined that power was getting to the fan, but the fan wouldn’t come on. I have ran the AC and drove the car to get it quite hot and still no fan.

Of course I didn’t check this myself, so I will do that today. Thank you for the link. I really hope this helps.

I want to learn to airbrush and I wanted to know what kind of airbrush I should buy. I want to use it for decorating and childrens temporary tattoos. I’m pretty sure that I want a double action. I’m not sure on the painting feeding, do I want a gravity feed or a siphon feed, if so do I want to use the color cups(If gracity feed) or bottles? I will be changing colors frequently so I want something that can change colors quickly. What accessories will I need, as in what size heads, I know I will need the smaller ones but I don’t want to buy a big one that makes a huge line. Do I go ahead and buy an air compressor or do I use those air compressed cans. Also I would like to know what brand of airbursh you would suggest. Thanks already!

This is my list, if someone thinks I should add, remove, or change and item, I am all ears. And the chemicals I am getting but did not list.

- Air compressor

- Random orbital polishers

- Fluid recapture devices

- Steam / carpet cleaner

- Hoses for water and air

- Hot water extractor

- Wet / dry vacuum cleaner
Ok some people are real idiots, I am not retarded and I am friggin coming online becuase my neighbor was starting one and he said these were his major items. I dont need a some jackass to tell me that I need customers or that I am in trouble when you have no clue.

Have a nice day to those who just answer and dont dance around the bush.

I have an old central air system. If i upgrade the gas furnace to an energy star, do i also need to upgrade the compressor?